Update history [ Ver.1.05 ]

DEMORA

- Internal processing has been improved.

There is no change affecting the product specification.

Caution when performing the update

- Never apply this update data to any product other than the BITRAZER, DEMORA, TORCIDO or SCOOPER. This update data may destroy the data or system program of other products.

- Never power-off your AIRA Modular while the update is in progress!

- If a power failure or similar accident occurs during the update process, the AIRA Modular won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.

- We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Procedure for the update

Caution

- You must not rename the extracted file.

- Never turn off the AIRA Modular's power while the update is in progress. Otherwise the system program or the AIRA Modular itself may be destroyed.

Please install the extracted system program file into your AIRA Modular according to the following procedure:

- Hold down [ GRF 6 ] button, and switch on the power.

- Connect the computer to the AIRA Modular's USB port by a USB cable.

- Open the "AIRAMODULAR" drive folder in your personal computer.

- Copy AIRA_MODULAR_UPD.BIN in the "airamod_sys_v105" folder into the "AIRAMODULAR" drive by dragging and dropping it.

Do not copy the "airamod_sys_v105" folder.

- After copying the file is completed, remove the USB drive from the personal computer.

With Windows 10 / 8 / 7: Right-click on the "AIRAMODULAR" icon in My Computer and execute "Eject."

With Mac OS X: Drag the "AIRAMODULAR" icon to the Trush icon in the Dock.

- Disconnect the USB cable.

- The center indicator lights up in light blue, and the [ GRF 6 ] button flashes.

- Press the [ GRF 6 ] button to start updating the file.

- While the update is in progress, the center indicator lights up in white and GRF 5 and GRF 6 light up in alternation.

- When the update ends, the center indicator flashes in blue, and GRF 5 and GRF 6 also flash.

- Turn the AIRA Modular power off.

- Please verify the version number with the procedure described in "How to tell the version" part of this document.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.