Fixes:

Modified the following phenomena.
1. At enlarged display in the playback mode, if you press the DISP. button to switch the position display window off, the right side frame of the window may remain. 
2. When you use an 8 MB SD card that has not been formatted in a camera, if you playback the first picture in the card in a camera, the picture will not be displayed correctly. 

Firmware installation steps:

1. Copy the firmware to the SD memory card.
2. Remove the SD memory card from the PC card reader/card slot and insert it into the camera.
3. Make sure that the camera’s power is turned off.
4. While pressing the ADJ./OK button, hold down the (Playback) button for 2-3 seconds.
- A confirmation message for the firmware update is displayed on the picture display.
5. Use the ADJ./OK button F to select [Yes], and then press the ADJ./OK button.
- The firmware update starts, and the following message is displayed on the picture display.
[Checking rewrite file]
[Rewriting program]
6. The camera automatically turns off and restarts.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.