Popular x64-bit Drivers Tags
- firmware x64-bit driver
- nikon x64-bit driver
- camera x64-bit driver
- nikon camera nx tether utility x64-bit driver
- nikon z6 ii 4k uhd camera x64-bit driver
- nikon z 5 4k uhd camera x64-bit driver
- nikon z6 ii firmware x64-bit driver
- nikon z7 ii firmware x64-bit driver
- nikon network settings utility x64-bit driver
- z6 ii x64-bit driver
- z7 ii camera firmware x64-bit driver
- nikon camera wireless x64-bit driver
- nikon wireless transmitter x64-bit driver
- nikon camera picture control x64-bit driver
- z6 ii camera firmware x64-bit driver
- nikon z6 ii 4k uhd camera firmware x64-bit driver
- z fc x64-bit driver
- nikon picture control utility x64-bit driver
- nx tether x64-bit driver
- lens x64-bit driver
- nikon z 5 firmware x64-bit driver
- nikon nx tether utility x64-bit driver
- picture control x64-bit driver
- transmitter x64-bit driver
- z 5 camera firmware x64-bit driver
- z7 ii x64-bit driver
- wireless transmitter x64-bit driver
- nikkor x64-bit driver
- nikon z7 ii 4k uhd camera x64-bit driver
- nikon z7 ii 4k uhd camera firmware x64-bit driver
Nikon Z 9 Camera Firmware 4.10
Time Required to Complete This Update&
&- This update takes approximately 6 minutes. A progress bar will be displayed when the update begins, but when updating from a “C” firmware version earlier than 2.00 you may notice that it takes about 2 minutes for the progress bar to be displayed. Do not turn off the camera until the firmware update is complete.&
&
IPTC Presets&
&- Performing this update from a “C” firmware version 3.10 or earlier will delete IPTC presets in the camera. This is an intended consequence of improvements to IPTC presets. Users who intend to continue using existing presets will need to copy them to a memory card using [IPTC] &> [Load/save] &> [Slot 1]/[Slot 2] &> [Copy to card] in the [SETUP MENU] before performing the update. The saved presets can be loaded from the memory card using [IPTC] &> [Load/save] &> [Slot 1]/[Slot 2] &> [Copy to camera] once the update is complete.&
- Note that IPTC presets cannot be loaded if menu settings were saved to a memory card using [Save/load menu settings] &> [Save menu settings] in a camera with a “C” firmware version 3.10 or earlier and loaded to the camera using [Save/load menu settings] &> [Load menu settings] after performing this update. Be sure to copy and load the IPTC presets individually via the method described above.&
- If this update is performed to a camera with a “C” firmware version 4.00 or later, the existing IPTC presets can be used after update without taking the above measures.&
&
Fixed the following issues:&
& - Added [Birds] and [Airplanes] to [AF subject detection options] in the photo shooting and video recording menus.&
&
Viewing the Camera Firmware Version:&
& - Turn the camera on.&
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.&
- Check the camera firmware version.&
- Turn the camera off. &
&
Updating the Camera Firmware:&
& - Create a folder on the computer hard disk and name it as desired.&
- Download the file to the folder newly-created.&
- Extract the file to a folder named “Z9Update”&
- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.&
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.&
- Insert the memory card into the camera and turn the camera on.&
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.&
- Once the update is complete, turn the camera off and remove the memory card.&
- Confirm that the firmware has been updated to the new version.&
About Digital Camera Updates:&
&Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.&
&
On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.&
&
It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.&
&
This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.&
&
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.&
&
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.&
&
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.&
Most popular Nikon 64-bit drivers
Members area
Top 64-bit Drivers
-
Intel Camera Sensor
OV5670 Driver
30.14393.3064.1 for
Windows 10 Anniversary
Update 64-bit x64 driver -
Nikon D750 Camera
Picture Control Utility
2.4.15 x64 driver -
Realtek Integrated
Camera Driver
10.0.15063.11301 for
Windows 10 64-bit x64 driver -
Realtek Integrated
Camera Driver
10.0.18362.20136 for
Windows 10 version 1803
64-bit x64 driver -
Realtek Integrated
Camera Driver
10.0.22000.20273 for
Windows 10 64-bit x64 driver -
Realtek Integrated
Camera Driver
10.0.22000.20231 for
Windows 10 64-bit x64 driver -
Realtek Integrated
Camera Driver
10.0.18362.20136 for
Windows 10 version 1903
64-bit x64 driver -
SunplusIT Integrated
Camera Driver 5.0.18.193
for Windows 10 21H2
64-bit x64 driver -
Intel AVStream Camera
2500 Driver
30.15063.6.6756 for
Windows 10 v1803 64-bit x64 driver -
Nikon Z 5 Camera
Wireless Transmitter
Utility 1.12.0 x64 driver -
Realtek Integrated
Camera Driver
10.0.18362.20133 for
Windows 10 S 64-bit x64 driver -
Nikon Z 8 Camera
Firmware 2.00 x64 driver -
Dynabook Tecra A50-D
Intel Wireless Bluetooth
Driver 22.0.0.2 for
Windows 7 64-bit x64 driver -
Realtek Integrated
Camera Driver
10.0.22000.20272 for
Windows 10 64-bit x64 driver -
Realtek Integrated
Camera Driver
10.0.22000.20272 for
Windows 10 Vibranium
64-bit x64 driver