ePrivacy and GPDR Cookie Consent by Cookie Consent

Popular x64-bit Drivers Tags

Nikon D4S Camera Firmware C:1.32

OS: Windows Vista / Vista 64 bit / 7 / 7 64 bit / 8.1 / 8.1 64 bit / 10 / 10 64 bit
downloads: 33
size: 33.50 MB
updated: October 11, 2016




&Changes:& &- Fixed the following issues, which would in rare cases occur when RAW+JPEG photographs were taken with write-enabled cards inserted in both the XQD and CompactFlash card slots, RAW primary - JPEG secondary selected for Secondary slot function in the SHOOTING MENU, and On selected for Network &> Options &> Auto send in the SETUP MENU. &- The camera would sometimes freeze or restart after users had pressed the shutter-release button all the way down without first activating the standby timer and then allowed the timer to expire or turned the camera off without first reactivating the timer.& &- If the shutter-release button was pressed all the way down to begin shooting with the standby timer off, the first shot would sometimes neither be marked for transfer nor uploaded.& & &Viewing the Camera Firmware Version& & - Turn the camera on. &- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.& &- Check the camera firmware version.& &- Turn the camera off.& & &Updating the Camera Firmware& & - Download and run the file. &- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.& &- Insert the memory card into the primary slot on the camera and turn the camera on.& &- Select Network in the SETUP MENU and confirm that Disable is selected for Network connection.& &- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.& &- Once the update is complete, turn the camera off and remove the memory card.& &- Confirm that the firmware has been updated to the new version.& & &About Digital Camera Updates:& & Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones. &On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.& &It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.& &This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.& &When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.& &However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.& &That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. &&



Most popular Nikon 64-bit drivers

Nikon WT-6 Wireless Transmitter Utility 1.12.0
This package contains the files needed for installing the Wireless Transmitter utility to adjust network settings. If your computer is currently running an older version of this utility, updating may fix ...

Nikon Z 50 Camera NX Tether Utility 2.1.0
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, ...

Nikon Z 6III Camera NX Tether Utility 2.1.0
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, ...


Members area

Login:
Password:
Remember me

Sign Up  |  Forgot Password?

Top 64-bit Drivers

64-bit Tags