Popular x64-bit Drivers Tags
- intel x64-bit driver
- chipset x64-bit driver
- msi x64-bit driver
- gigabyte x64-bit driver
- asus x64-bit driver
- rst x64-bit driver
- acer x64-bit driver
- aspire x64-bit driver
- mei x64-bit driver
- asrock x64-bit driver
- motherboard x64-bit driver
- sony x64-bit driver
- sata x64-bit driver
- notebook x64-bit driver
- biostar x64-bit driver
- dell x64-bit driver
- raid x64-bit driver
- ahci x64-bit driver
- lenovo x64-bit driver
- wind top x64-bit driver
- management engine x64-bit driver
- usb 3.0 x64-bit driver
- usb 3 0 x64-bit driver
- preinstall x64-bit driver
- gateway x64-bit driver
- desktop x64-bit driver
- sager x64-bit driver
- alienware x64-bit driver
- gigabyte ga p35c ds3r chipset driver x64-bit driver
- latitude x64-bit driver
Intel R2208WF0ZS Server System SYSCFG Utility 14.1.21
Change List:
- Build 21: Add "/gpc" to support graceful power cycle
- Build 21: Add deb package for Debian
- Build 21: Fix BIOS /bcs failure when option name contains ","
- Build 20: Fix BMC restoration failure when channel 1 is not available
- Build 19: Support new SKU
- Build 18: Fix a defect for BMC LAN configuration
- Build 18: Support Fan PWM Offset display and setting
- Build 17: Support BMC LAN DNS setting and display
- Build 16: Support new BMC user configuration model
- Build 16: Support new BMC version format
- Build 15: Support new SKU
- Build 14: Support new SKU
- Build 13: Fix exception hang issue under EFI shell
- Build 12: Add two new SMTP command parameters
- Build 12: Offer backward compatibility for dumping BMC SOL log on older platforms
- Build 11: Support new IPMI commands for SMTP configuration
- Build 10: Support BIOS security fix
- Build 10: Fix a defect for EFI variable creation and deletion
- Build 10: Fix error handling of "/sbmcsol"
- Build 9: Fix system boot order restoration
- Build 9: Fix error handling of "/dt"
- Build 8: Support a new SKU
- Build 8: Update supported OS list
- Build 7: Remove boot code information display if it is not supported
- Build 6: Fix a defect of BIOS setting save and restoration
Known Issues:
1. To be noted, any BIOS setting changed by SYSCFG, it requires reboot to make BIOS setting change take effective.
2. Reordering boot devices using /bbo should be followed by a system reset as per IPMI spec. Otherwise an immediate display command using /bbo switch may not display the correct boot device order.
3. Restore of BIOS variables will not work for Read only variables or variables which may become read only due to dependent variables.
4. BIOS variables with leading/tailed space can't be restored successfully.
5. As some BIOS settings have dependencies, using syscfg INI file to save/restore BIOS settings only once may not be able to achieve the goal. The solution is to use command line or INI file to change/restore twice. For example, if you want to restore "ATS Support", you have to restore "Intel VT for Directed I/O" from "Disable" to "Enable" first in order to make "ATS Support" visible, then to do second restore to change "ATS Support" value. Upon system reboot, the new BIOS settings will take effect.
6. Utilities, SNMP-SA and IASC cannot run at the same time due to KCS port conflict. There will be error message "Error: Application Cannot Communicate to the BMC.".
7. The settings under server management are saved in BMC. For some of the settings under server management, after a reboot the values from BMC will override the values set through "/bcs" switch.
8. When using syscfg to get BIOS setting, there will be some difference between UEFI shell and OS. For example, syscfg cannot get "Processor PCIe Link Speed" in OS.
9. IO port access is not allowed in Linux when UEFI secure boot is enabled. Please disable UEFI secure boot in F2 menu before running utility.
10. Debian OS does not allow IO memory map by default. User needs to add "iomem=relaxed" to grub boot option to enable IO memory map. Otherwise some features may not work.
About Tuning Utility:
Install this tuning utility and you will be able to manually configure various overclocking values, such as CPU and memory frequencies, system clocks, fan speeds, and monitor temperature for different components.
However, please note that you're supposed to tweak these settings only between supported ranges; changing configurations to extreme values without additional cooling systems might seriously damage components.
The installation steps needed for the software to be applied are very easy: get the downloadable package, extract it if necessary, run the available setup, and carefully follow all displayed instructions for a complete and successful installation.
In addition to that, please note that it's recommended you perform a system reboot so that all changes can take effect properly. Bear in mind that, even though other OSes might be compatible, we don't suggest against installing this release on platforms other than the highlighted ones.
That being said, click the download button, get the package and set up this feature on your system. For more on the latest releases, keep checking back with our website to “stay updated one minute ago.”
Most popular Intel 64-bit drivers
Members area
Top 64-bit Drivers
-
ASRock X870E Taichi
Nahimic3 Utility
1.10.2_APO4 x64 driver -
ASRock Z890-CW Nahimic3
Utility 1.10.2_APO4 x64 driver -
Gigabyte X670 AORUS
ELITE AX (rev. 1.1) AMD
RAIDXpert2 Utility
9.3.3.117 x64 driver -
ASRock B760M Pro-A Intel
Chipset Driver
10.1.19600.8418 x64 driver -
ASRock Z890 Pro RS Intel
GNA Driver 3.5.0.1578 x64 driver -
Gigabyte A620M GAMING X
(rev. 1.0) AMD Chipset
Driver 5.11.02.217 x64 driver -
ASRock Z890M Riptide
WiFi Nahimic3 Utility
1.10.2_APO4 x64 driver -
ASRock X870E Taichi Lite
Motherboard Utility
4.1.12 x64 driver -
ASRock Z890 Pro RS WiFi
Nahimic3 Utility
1.10.2_APO4 x64 driver -
Gigabyte B760M C V2
(rev. 1.0) Intel HID
Event Filter Driver
2.2.2.1 x64 driver -
ASRock Z890 Taichi
Polychrome RGB Utility
2.0.185 x64 driver -
ASRock X870E Taichi AMD
RAID Driver 9.3.2.255 x64 driver -
ASRock X870 Pro RS
Nahimic3 Utility
1.10.2_APO4 x64 driver -
ASUS PRIME Z790-A WIFI
AI Suite Utility 3.03.17
for Windows 10 64-bit x64 driver -
ASUS PRIME Z790-P WIFI
D4 AI Suite 3 Utility
3.03.36 for Windows 10
64-bit x64 driver