This utility dumps the following information to log files:

1. Platform Firmware Inventory
2. Sensor information
3. Sensor Data Records
4. Base Board FRU
5. System BMC Boot Order
6. BMC User Settings
7. BMC LAN Channel Settings
8. BMC SOL Channel Settings
9. BMC Power Restore Policy Settings
10. BMC channel settings
11. SMBIOS Type 1, Type 2, Type 3
12. Processor
13. Memory
14. Operating System Information
15. IDESCSI
16. HARD Drive
17. Device Manager Information (a.k.a drivers)
18. List Of Software Installed
19. BIOS Settings (per BIOS SETUP F2 Screen).
20. RAID settings and RAID log (Not available on Windows and Linux)
21. Operating System Event Log
22. SATA
23. PCI Bus Device Information
24. Power Telemetry (If Available)

Supported platforms:

- Kelton Pass

Supported Operating Systems:

- UEFI Shell
- WinPE 4.0 (x64)
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows 10
- RHEL 6.8 (x64)
- RHEL 7.3
- RHEL 7.5
- RHEL 7.6
- RHEL 8.0
- SLES 11.4 (x64)
- SLES 12.2
- SLES 15&Sp1
- CentOS 7.3 (x64)
- Debian 8.10

About Tuning Utility:

Install this tuning utility and you will be able to manually configure various overclocking values, such as CPU and memory frequencies, system clocks, fan speeds, and monitor temperature for different components.

However, please note that you're supposed to tweak these settings only between supported ranges; changing configurations to extreme values without additional cooling systems might seriously damage components.

The installation steps needed for the software to be applied are very easy: get the downloadable package, extract it if necessary, run the available setup, and carefully follow all displayed instructions for a complete and successful installation.

In addition to that, please note that it's recommended you perform a system reboot so that all changes can take effect properly. Bear in mind that, even though other OSes might be compatible, we don't suggest against installing this release on platforms other than the highlighted ones.

That being said, click the download button, get the package and set up this feature on your system. For more on the latest releases, keep checking back with our website to “stay updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.