Changes:

- Disk Management is not sync, when user make JBOD drives on/off in DDA environment.
- MR7.8-9480-8i8E: Hit BSOD After creating Raid 5 With 21 drives
- Drop in SATA Max performance
- Fix Code analysis Warnings for MR Windows Driver
- MR 7.8: Code Review changes.
- MR 7.8 Handle QDepth setting when Targetprop DCMD failed.
- MR_7.8: On single CPU system, JBOD's are not reflected in Disk Management in a particular scenario..
- Enable/Disable of RTTrace Logging via StorCLI .
- MR7.8: Controller not accessible by OS after OCR
- Forced crashdump did not produce the memory dump file when Windows 2016 is on VD
- MR 7.8: Avoid DPC Timeout BSOD while waking up from S3 for Windows Driver.
- Add RtTrace event for Device IO pause and Resume
- MR7.7: OS hang during OCR w/ I/O running on VD and EPD.
- Windows Driver allocates more QD than FW reported.
- MR7.8: On Win10RS1 x86 - BSOD IRQ_NOT_LESS_THAN_EQUAL is observed during system wake-up from hibernation
- Hitting KA while doing LD creation in loop
- Making LDs offline to generate pinned_cache or do foreign import caused Windows BSOD
- PA2-MR7.7-FW: Windows Disk Management tool does not detect the secured JBOD after moving it to ctrl0 from ctrl1
- MR7.8-9460-16i:RAID Personality(9460-16i) & JBOD Personality(9A60-16i) Show Different Driver name in Win 10x32 bit
- Implement MR Driver/FW Handshake to copy Rttrace File when copying Snapdump.
- EPD behavior to handle IO greater than MDTS matches JBOD
- New driver IO path implemented
- TM through CLI has similar behavior to a case of genuine TM from Storport

This package contains the files needed for installing the Windows driver for Intel Integrated RAID RMSP3LD060 (Integrated Controller on AHWBPBGB24R for S2600BP family) supporting RAID 0, 1, 5, 10. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

To install this package please do the following:

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.

About Tuning Utility:

Install this tuning utility and you will be able to manually configure various overclocking values, such as CPU and memory frequencies, system clocks, fan speeds, and monitor temperature for different components.

However, please note that you're supposed to tweak these settings only between supported ranges; changing configurations to extreme values without additional cooling systems might seriously damage components.

The installation steps needed for the software to be applied are very easy: get the downloadable package, extract it if necessary, run the available setup, and carefully follow all displayed instructions for a complete and successful installation.

In addition to that, please note that it's recommended you perform a system reboot so that all changes can take effect properly. Bear in mind that, even though other OSes might be compatible, we don't suggest against installing this release on platforms other than the highlighted ones.

That being said, click the download button, get the package and set up this feature on your system. For more on the latest releases, keep checking back with our website to “stay updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.