Key Features:

- Support 12th Gen Intel Series Processors
- Dual Channel Non-ECC Unbuffered DDR5, 2 DIMMs
- 15+1+2 Phases Direct VRM Design with 105A Power Stage and Tantalum Polymer Capacitor
- DDR5 XTREME MEMORY Design with SMD DIMM and Shielded Memory Routing
- Exclusive onboard Overclocking Kit for extreme overclocking
- Intel WIFI 6E 802.11ax 2T2R & BT 5 with AORUS Antenna
- Amp-Up Audio with ALC1220 and WIMA Audio Capacitors
- Blazing Fast Intel 2.5GbE LAN with cFosSpeed
- 4 x Ultra-Fast NVMe PCIe 4.0/3.0 x4 M.2 with Thermal Guards
- Dual SuperSpeed USB 3.2 Gen2x2 TYPE-C delivers up to 20Gb/s transfer speeds
- RGB FUSION 2.0 with Multi-Zone Addressable LED Light Show Design, Support Addressable LED & RGB LED Strips
- Smart Fan 6 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP and Noise Detection
- Q-Flash Plus Update BIOS without Installing the CPU, Memory and Graphics Card

This package contains the files needed for installing the SATA Preinstall driver. If your computer is currently running an older version of this driver, updating may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible, we do not recommend applying this release on platforms other than the ones specified.

To install this package please do the following:

- Click the Download button and follow the steps for saving the package on your computer.
- Save all work in progress and close open applications.
- Note for .ZIP archives: Extract the file and enter the newly-created directory.
- Locate and run the available setup file.
- Allow Windows to run the file (if necessary).
- Read and agree with the License Agreement to proceed with the installation process.
- Follow the instructions displayed on-screen.
- Close the wizard and perform a system reboot to allow changes to take effect.

About SATA / AHCI / RAID Preinstall Drivers:

Download this package if you intend to switch the SATA settings between available modes (AHCI, RAID, or IDE) after an operating system has been installed.

Remember that if you modify these settings without applying the proper files, the OS will not be able to boot until requirements are met or changes are reverted.

As for the installation method, it would be best if you refer to the manufacturer's update guide, read all the steps, and initiate this task only when you have completely familiarized yourself with the procedure.

Even though other platforms might also be compatible with this release, we strongly recommend that you apply the driver only on specified operating systems in order to successfully perform the installation. If a failure occurs, the computer could suffer serious malfunctions.

With these in mind, if you wish to modify the SATA settings according to the mode highlighted in this version, click the download button and make the desired changes. Visit our website as often as possible to stay up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.