Popular x64-bit Drivers Tags
- gigabyte x64-bit driver
- intel x64-bit driver
- motherboard x64-bit driver
- chipset x64-bit driver
- control center x64-bit driver
- rst x64-bit driver
- app center x64-bit driver
- smart backup x64-bit driver
- easytune x64-bit driver
- 3d osd x64-bit driver
- fast boot x64-bit driver
- rst preinstall x64-bit driver
- me firmware x64-bit driver
- preinstall x64-bit driver
- smart time lock x64-bit driver
- raid x64-bit driver
- z390 chipset x64-bit driver
- ezraid x64-bit driver
- usb blocker x64-bit driver
- amd x64-bit driver
- cloud station x64-bit driver
- auto green x64-bit driver
- power management x64-bit driver
- smart keyboard x64-bit driver
- optane x64-bit driver
- sata preinstall x64-bit driver
- bios x64-bit driver
- z370 chipset x64-bit driver
- siv x64-bit driver
- serial io x64-bit driver
Gigabyte Z590 GAMING X (rev. 1.0) Intel Serial IO Driver 30.100.2051.37 for Windows 10 64-bit
Key Features:
- Supports 11th and 10th Gen Intel Core Series Processors
- Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
- Direct 12+1 Phases Digital VRM Solution with 60A DrMOS
- Shielded Memory Routing for Better Memory Overclocking
- Fully Covered Thermal Design with High Coverage MOSFET Heatsinks
- Fast 2.5GbE LAN with Bandwidth Management
- Triple Ultra-Fast NVMe PCIe 4.0 /3.0 x4 M.2 with Thermal Guards
- Rear USB 3.2 Gen2 Type-C and Front USB3.2 Gen1 Type-C for Connecting Devices
- Pre-installed IO Shield for Easy and Quick Installation
- RGB FUSION 2.0 with Multi-Zone Addressable LED Light Show Design, Support Addressable LED & RGB LED Strips
- Smart Fan 6 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP
- Q-Flash Plus Update BIOS without Installing the CPU, Memory and Graphics Card
Driver Installation via Installer:
- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Locate the “SetupSerialIO.exe” file.
- Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
- You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
- Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
- Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
- Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
- After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
- Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
- To see all available options for the Installer, run command “SetupSerialIO.exe -?”
- You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
- Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
- After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
- Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
- After the installation of all the drivers, reboot the system.
About Serial IO Drivers:
If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.
Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.
When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.
However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.
That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Most popular Gigabyte 64-bit drivers
Members area
Top 64-bit Drivers
-
ASRock X870E Taichi
Nahimic3 Utility
1.10.2_APO4 x64 driver -
ASRock Z890 Pro RS Intel
GNA Driver 3.5.0.1578 x64 driver -
Gigabyte X670 AORUS
ELITE AX (rev. 1.1) AMD
RAIDXpert2 Utility
9.3.3.117 x64 driver -
ASRock B760M Pro-A Intel
Chipset Driver
10.1.19600.8418 x64 driver -
ASRock Z890-CW Nahimic3
Utility 1.10.2_APO4 x64 driver -
ASRock Z890 Pro-A Intel
GNA Driver 3.5.0.1578 x64 driver -
AMD SMBus Driver
5.12.0.38 for Windows 10
Creators Update 64-bit x64 driver -
Gigabyte A620M GAMING X
(rev. 1.0) AMD Chipset
Driver 5.11.02.217 x64 driver -
ASRock Z890M Riptide
WiFi Nahimic3 Utility
1.10.2_APO4 x64 driver -
ASRock X870E Taichi AMD
RAID Driver 9.3.2.255 x64 driver -
ASRock Z890 Pro RS WiFi
Nahimic3 Utility
1.10.2_APO4 x64 driver -
ASUS PRIME Z790-A WIFI
AI Suite Utility 3.03.17
for Windows 10 64-bit x64 driver -
Intel B360 Chipset INF
Utility 10.1.19867.8574 x64 driver -
Gigabyte A620M GAMING X
AX (rev. 1.1) AMD AI NPU
Driver 10.1109.0008.128 x64 driver -
Gigabyte X870 EAGLE
WIFI7 AMD RAIDXpert2
Utility 9.3.2.255 x64 driver