Changes:

- Adds DF C-State item
- Fixes primary display control
- Modifies the behavior of the onboard speaker

Windows Installation:

- Download the correct .zip file
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

BIOS Installation:

- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash. 

About BIOS Update Utility:

Applying a new BIOS version can bring various fixes, add new features, or improve existing ones; however, this action is very risky and should be carefully carried out in a steady power environment (such as the one ensured by a UPS unit), and only when it is really needed.

Moreover, it is recommended that the BIOS be upgraded by someone who has the ability to use advanced system features. It can also be fulfilled by a regular user as well, but at their own risk.

The Basic Input/Output System (BIOS) is a highly important piece of software that loads the currently installed operating system and tests all hardware components – so make sure you flash it correctly.

When it comes to changing the BIOS version, the update utility searches for a compatible package in any given location or on the web and, if found, it will automatically install the desired build, if and when your approval is given.

Do take into account that failing to perform the installation could seriously damage your system, and the faulty BIOS might even render it unusable.

Therefore, if you intend to upgrade your BIOS, hit the download button, get and install the package, and run the utility to check if a newer version is available. Don't forget to check with our website as often as possible to be up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.