You are here: Home \ Drivers \ Hdd / Ssd / Nas / Usb Flash \ Buffalo \ Buffalo TS3210DN NAS Firmware 3.11

Buffalo TS3210DN NAS Firmware 3.11

OS: Windows 2008 / 7 / 7 64 bit / Server 2012 / 8.1 / 8.1 64 bit / 10 / 10 64 bit

downloads: 47

size: 449.70 MB

updated: April 25, 2017

manufacturer: Buffalo

tags: Buffalo TS3210DN NAS Firmware 3.11, download Buffalo TS3210DN NAS Firmware 3.11, Buffalo TS3210DN NAS Firmware 3.11 free download, Buffalo TS3210DN Network Storage Firmware, Buffalo TeraStation 3210DN NAS Firmware, Buffalo TeraStation 3210DN Storage Firmware, TS3210DN, Firmware, Buffalo, NAS

Download

&Added and Modified Features& & - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. &- Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running the actions of the subfolders access restrictions to the shared folder that contains the trashbox folder. To run the actions, select the trashbox folder itself.& &- RAID: Modified to be able to select unformatted drives when creating a RAID array or changing the RAID mode.& &- iSCSI: Improved to VMware-qualified level. Refer to the products' website for the officially announced certificate information.& &- Dropbox: Modified to be compatible with the Dropbox API version 2.& &- IP Address: Modified to add the option for delaying the restart of network services that occurs by triggering the LAN port's link up/down.& &- Active Directory: Modified to search for a domain controller using the IP address, DNS name, and computer name.& &- Active Directory: Modified to expand the number of acquirable domain users and groups from a maximum of 1000 to 10,000.& &- Replication: Modified to use a backup device access key for a replication task. This access key is the same as the backup key that has already been used.& &- Failover: Improved the security level.& &- Power Management: Connecting two UPS devices is now supported on the TS51210RH series TeraStations.& &- Drive Setup Mode: The I61 information message is now displayed when the TeraStation is in drive setup mode.& &- Settings: Improved the security level.& & &Bug Fixes& & - File Sharing: Fixed a bug where file sizes were not displayed properly on Windows 10 via SMB connections. &- File Sharing: Fixed a bug where an .exe file could not run in Explorer if the file was uploaded via WebAccess or AFP connections.& &- Subfolders' Access Restrictions: Fixed a bug where actions did not run for the first level files if "Do not apply to folders and files in the second level folder and beyond" is selected.& &- Drives: Fixed a bug where the help for drive formatting were not displayed on Settings if the display language is configured to Japanese or English.& &- Drives: Fixed a bug where the drive bay status showed "Dismounted/Plugged" even if no drive is plugged.& &- RAID: Fixed a bug where the drive bay status showed "Dismounted/Plugged" even if no drive was plugged in.& &- RAID: Fixed a bug where the status was not displayed properly when RAID 5 or 6 array is configured with RMM.& &- Web Services: Fixed a bug where 1 GB or larger size files could not be uploaded to AmazonS3.& &- Web Services: Fixed a bug where invalid folders were created if syncing files from the Dropbox folder.& &- Web Services: Fixed a bug where about 1.5 GB or larger size files could not be downloaded from the Dropbox folder.& &- Web Services: Fixed a bug where the error message was displayed blank when the error occurred during renaming the shared folder name that the folder is used for Dropbox Sync.& &- Web Services: Fixed a bug where Dropbox Sync tasks disappeared if the tasks were configured using invalid proxy server settings.& &- Port Trunking: Fixed a bug where the network connection became unavailable on the TS51210RH series TeraStation when disconnecting/reconnecting the Ethernet cable if port trunking is configured.& &- Backup: Fixed a bug where the TeraStation could not be detected when configuring backup on another TeraStation if too many users and/or groups were added for access restrictions.& &- Replication: Fixed a bug where the TeraStation could not be detected when configuring replication on another TeraStation if too many users and/or groups were added for access restrictions.& &- Replication: Fixed a bug where files may disappear if the second level folders in the same shared folder were configured as each replication source and destination folder.& &- Replication: Fixed a bug where a replication error was still detected after unsynced files were resynced and the error had disappeared.& &- Failover: Fixed a bug where the TeraStation could not be detected when configuring failover on another TeraStation if too many users and/or groups were added for access restrictions.& &- Power Management: Fixed a bug where the power supply stopped from the PET501J1C UPS device by Fuji Electric before the shutdown process completed.& &- Power Management: Fixed a bug where the TeraStation did not recover from the E10 error message if disconnecting/reconnecting the serial cable with a serial connection UPS device.& &- Power Management: Fixed a bug where the E10 error message occurred if UPS settings were configured using a serial connection UPS device.& &- Power Management: Fixed a bug where the TeraStation may shut down again when the unit boots up while the power outage still continue. This is triggered if the UPS settings were configured that the TeraStation was shut down after the specified minutes passed during when power outage occurred.& &- Power Management: Fixed a bug where the UPS settings were finished even if no UPS device was connected.& &- Power Management: Fixed a bug where the E10 error message was displayed randomly if the TeraStation's time was configured using previous time settings.& &- Sleep Mode: Fixed a bug where the power LED did not blink while the TeraStation is in sleep mode.& &- Drive Setup Mode: Fixed a bug where a drive error LED did not extinguish if the TeraStation boot up in drive setup mode while a drive error LED was glowing.& &- Settings: Fixed a bug where Settings became inaccessible.& &- Settings: Fixed a bug where invalid error message was displayed if a non-admin user was logged in to Settings and a specific operation was made.& & &Caution:& & - Please consult your local technical support representative if you experience any problems caused by this firmware update. &- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.& &- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.& & &How to Use the Updater:& & 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different. &&For example, if the IP address and subnet mask of the computer are&& && " 192.168.0.10 , 255.255.255.0 "&& &&and the IP address and subnet mask of the TeraStation are&& && " 192.168.1.150 , 255.255.255.0 "&& && then the updater will _not_ work properly.&& &&In this case, reconfigure the TeraStation's IP address and subnet mask to&& && " 192.168.0.150 , 255.255.255.0 ".&& &&Then they will be on the same subnet and the updater will work properly.&& &2. Close all applications. Also, stop or exit any firewall software.& &3. Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.& &4. Select the TeraStation to update if multiple TeraStation are connected.& &5. Click "Update" and enter the TeraStation's admin password.& &6. Click "OK".& &7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.& &8. When the update finishes, a message will be displayed.& & &About Network-Attached Storage Updates:& & Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications. &Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.& &So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.& &Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.& &With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. &&