You are here: Home \ Drivers \ Hdd / Ssd / Nas / Usb Flash \ Buffalo \ Buffalo LS220DB NAS Firmware 1.76

Buffalo LS220DB NAS Firmware 1.76

OS: Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 8.1, Windows 8.1 64 bit, Windows 10

downloads: 13

size: 198.60 MB

updated: September 02, 2021

manufacturer: Buffalo

tags: Buffalo LS220DB NAS Firmware 1.76, download Buffalo LS220DB NAS Firmware 1.76, Buffalo LS220DB NAS Firmware 1.76 free download, Buffalo LinkStation 220 NAS Firmware, Buffalo LinkStation 220 Network Storage Firmware, Buffalo LS220DB Network Storage Firmware, LS220DB, Firmware, Buffalo, NAS

Download

&Added and Modified Features:&&- [Drives]: Modified the drive check process that occurs at startup for the LS200 series LinkStations (but not for the LS210D models).&
&& Caution:&& - Please consult your local technical support representative if you experience any problems caused by this firmware update.&
- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.&
- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.&
&&How to Use the Updater:&& 1. Connect the LinkStation properly and configure the LinkStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.&
For example, if the IP address and subnet mask of the computer are &
" 192.168.0.10 , 255.255.255.0 "&
and the IP address and subnet mask of the LinkStation are &
" 192.168.1.150 , 255.255.255.0 "&
then the updater will _not_ work properly. &
In this case, reconfigure the LinkStation's IP address and subnet mask to &
" 192.168.0.150 , 255.255.255.0 ".&
Then they will be on the same subnet and the updater will work properly.&
2. Close all applications. Also, stop or exit any firewall software. &
3. Extract the downloaded file and run ""LSUpdater.exe". When a LinkStation is detected, an update window will open.&
4. Select the LinkStation to update if multiple LinkStation are connected.&
5. Click "Update" and enter the LinkStation's admin password.&
6. Click "OK".&
7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.&
8. When the update finishes, a message will be displayed.&&About Network-Attached Storage Updates:&&Upgrading the Network-Attached Storage (NAS) firmware can improve the system's overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.&
&
Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.&
&
So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.&
&
Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.&
&
With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases.&&&

Buffalo LS220DB NAS Firmware 1.76 64-bit driver download - X 64-bit Download

Popular x64-bit Drivers Tags

Buffalo LS220DB NAS Firmware 1.76

Most popular Buffalo 64-bit drivers

Members area

Top 64-bit Drivers

64-bit Tags

	x64 / 64-bit Drivers Search:

Login:
Password:
Remember me